Tattoo Machine Accessories

Tattoo machine accessories usually refer to Armature Bars, Binding Posts, Capacitors, Screws & Washers, Rubber Bands,
O-rings, Spare Springs, Tattoo Machine Stand, Doughnut Tattoo Grommets…

The standard Armature Bars for a Liner & Shader machine are made from low carbon steel to increase magnetism and they
come complete with screw & washer.The  front binding post is also called a top contact post and it comes complete with a
  tipped contact screw, plastic insulator washers and fixing screws. It must be fitted so that the insulating washers are at
either side of the machine frame when the post is tightened. The twin coil tag must be connected between the contact post and
insulator washer on the inside of the frame and must not touch the machine frame.

Tattoo machine coils capacitor is a 47mf at 25v and used to smooth the current of the machine coils. Easily replace this
capacitor on your coils by soldering it to the top and back contact tags between the twin coils.Rubber Bands are used on tattoo machinesby wrapping around the frame and needles to pull the tattoo needles back. Thishelps the needles to run smooth when insidethe tipor tube.Screws & Washers are Easy fit Colet screw for insertion and release of tubes on machines.Tattoo machine accessories usually refer to Armature Bars, Binding Posts, Capacitors, Screws & Washers, Rubber Bands,O-rings, Spare
Springs, Tattoo Machine Stand, Doughnut Tattoo Grommets…

The standard Armature Bars for a Liner & Shader machine are made from low carbon steel to increase magnetism and they
come complete with screw & washer.The  front binding post is also called a top contact post and it comes complete with a
  tipped contact screw, plastic insulator washers and fixing screws. It must be fitted so that the insulating washers are at either
side of the machine frame when the post is tightened. The twin coil tag must be connected between the contact post and
insulator washer on the inside of the frame and must not touch the machine frame.

Tattoo machine coils capacitor is a 47mf at 25v and used to smooth the current of the machine coils. Easily replace this
capacitor on your coils by soldering it to the top and back contact tags between the twin coils.Rubber Bands are used on tattoo machines by wrapping around the frame and needles to pull the tattoo needles back. This helps the needles to run smooth
when inside the tip
or tube.Screws & Washers are Easy fit Colet screw for insertion and release of tubes on machines.These O Rings cushion
between the tattoo machine armature Bar and front Spring.TATTOO MACHINE SPRINGS Precision cut front and
back springs for Tattoo machine.

Tattoo Machine Stand is made from durable plastic and is great for keeping the tattoo shop tidy and keeping your tattoo machine
out of the way. Easy to clean using green soap wipes or alkotip swabs.Doughnut Tattoo Grommets are available in either
black or multi- coloured .They are used to cushion and connect the needle bar to the Tattoo Machine armature bar. You simply
place the grommet through the needle bar loop and then attach it to the machine armature bar. These are a must for any tattoo shop.These O Rings cushion between the tattoo machine armature Bar and front Spring.TATTOO MACHINE SPRINGS Precision
cut front and back springs for Tattoo machine.Tattoo Machine Stand is made from durable plastic and is great for keeping the
tattoo shop tidy and keeping your tattoo machine out of the way. Easy to clean using green soap wipes or alkotip swabs.

Doughnut Tattoo Grommets are available in either black or multi- coloured .They are used to cushion and connect the needle
bar to the Tattoo Machine armature bar. You simply place the grommet through the needle bar loop and then attach it to
the machine armature bar. These are a must for any tattoo shop.